High Pulley Cable for ON-Line 1500 - 219.7" Long.
This cable has newer single piece (cable stop and cable ballend) stainless steel fitting on lat bar end of cable.
This cable will not fit original lat bars that look like this:
If you do have this original lat bar, you will need a new PN62640 lat bar to work with this new cable. Original cable design is no longer available.
Click "More Pictures" icon to view extensive cable chart listing.
You may want to also order 20 feet of PN67910 to aid in pulling in the new cable. Install directions with 67910 clear tubing: Disconnect high pulley cable at weight stack top plate. Push clear tubing over this cable end 1". Pull out old cable at lat bar end. Disconnect old cable from clear tube and replace with new cable by pushing clear tube over the cable end 1". Pull new cable into the machine by pulling at the weight stack end of the clear tubing. If the pulling tension goes up, do not pull harder because the clear tubing will come off. Instead, pull off the two upper access doors on the tall column and see where the clear tubing is hanging up. You should be able to slightly push or pull at this localized spot to get going again. Re-attach cable at weight stack top plate.